Moderated newsgroup PARTS RECYCLING for somebody LOOKING OR SELLING.... > Commercial Appliances
> Scales
> Fluke 117C hvac multimeter temp & microamps free smd
Fluke 117C hvac multimeter temp & microamps free smd
What is for sale: Fluke 117C hvac multimeter temp & microamps free smd
Fluke 117c Electrician's Multimeter with Non-Contact voltage
Compact true-rms meter for commercial applications. The Fluke 117c is the ideal meter for demanding settings like commercial buildings, hospitals and schools. The 117c includes integrated non-contact voltage detection to help get the job done faster.
* VoltAlertâ„¢ technology for non-contact voltage detection
* AutoVolt automatic ac/dc voltage selection
* Low input impedance: helps prevent false readings due to ghost voltage
* Large white LED backlight to work in poorly lit areas
* True-rms for accurate measurements on non-linear loads
* Measures 20 A (30 seconds momentary; 10 A continuous)
* Resistance, continuity, frequency and capacitance
* Min/Max/Average with elapsed time to record signal fluctuations
* Compact ergonomic design for one-handed operation
* Compatible with optional magnetic hanger (ToolPakâ„¢) for hands free operation
* CAT III 600 V safety rated
Maximum voltage between any terminal and earth ground
6 kV peak per IEC 61010-1 600 V CAT III, Pollution Degree 2
11 A, 1000 V FAST Fuse (Fluke PN 803293)
6,000 counts, updates 4 per second
33 segments, updates 32 per second
9 volt Alkaline, NEDA 1604A/ IEC 6LR61
400 hours typical, without backlight
± ([% of reading] + [counts]): 2.0% + 3
2.0 % + 3 (dc, 45 Hz to 500 Hz)
4.0 % + 3 (500 Hz to 1 kHz)
1.0 % + 3 (dc, 45 Hz to 500 Hz)
2.0 % + 3 (500 Hz to 1 kHz)
1.0 % + 3 (dc, 45 Hz to 500 Hz)
2.0 % + 3 (500 Hz to 1 kHz)
Beeper on < 20 Ω, off > 250 Ω; detects opens or shorts of 500 μs or longer.
Temperature2 (Type-K thermocouple)
AC amps true-rms (45 Hz to 500 Hz)
20 A continuous overload for 30 seconds max
20 A continuous overload for 30 seconds max
1) All ac voltage ranges are specified from 1 % to 100% of range. Because inputs below 1 % of range are not specified, it is normal for this and other true-rms meters to display non-zero readings when the test leads are disconnected from a circuit or are shorted together. For volts, crest factor of ≤ 3 at 4000 counts, decreasing linearly to 1.5 at full scale. AC volts is ac-coupled. Auto-V LoZ, and ac mV are dc-coupled.
2) Frequency is ac coupled, 5 Hz to 50 kHz for ac voltage.
Mechanical & General Specifications
100% NEW FLUKE 117C TRUE RMS MULTIMETER
. Accessories : Test leads , English Operation Manual, Holster
<<< DON'T MISS THE FREE SMD TWEEZER >>>
QUANTITY DISCOUNT AVAILABLE !!!
Also avaiable Fluke 115C, 116C
Contact: I-combs@parts-recycling.com (Ina Combs)
(email hidden).